Pylon-Monitor V2 – Real-Time Pylontech Battery Monitoring
Compatible with Pylontech batteries fitted with an RS-232 Console port: US5000, US3000C, US3000, US2000C, US2000B+, UP2500. Monitors up to 4 chained units (64 cells) individually from a single Pylon-Monitor, with a per-battery selector on the dashboard.
Main Features:
- Connection: Pylontech Console RJ45 (RS-232) port
- Built-in screen: 1.8″ TFT IPS (SOC, voltage, current, SOH, cycles)
- Power: USB (cable included)
- Web dashboard + JSON API (/api.json)
- Home Assistant ready (MQTT auto-discovery), Jeedom, Node-RED, Domoticz
- Remote diagnostics: per-cell voltage and temperature, SOC/SOH history, charge cycles
- Lifetime remote firmware updates (OTA)
- Device weight: 93g · Shipped parcel weight: 123g
- 100% local, no cloud, no subscription
Genuine parts, hydraulic crimping
Certified compatibility
Guaranteed delivery
Credit Card, PayPal, Bank Transfer
Key Features
- Authentic Amphenol connectors
- 25mm² cable section for maximum conductivity
- Compatible with Pylontech, BYD, and Goodwe batteries
- Complies with European safety standards
Quick Installation Guide
- Plug the included RJ45 cable between the Pylon-Monitor and the battery's Console port, then power it with a USB cable.
- Join the
PylonMonitor-SetupWiFi network from your phone, then select your own WiFi network. - Open the IP address shown on the TFT screen in your browser: your battery's live dashboard appears instantly.
Frequently Asked Questions
- Does it work without internet? Yes, the device is 100% local on your WiFi network.
- Does it void my Pylontech warranty? No, the Console port is read-only and never changes battery behaviour.
- Compatible with multiple chained batteries? Yes, up to 4 units (64 cells) from a single device.
- Do I need an app or account? No, the dashboard works from any browser on your local network.
The Pylon-Monitor V2 is a standalone device that reads State of Charge, voltage, current, cell health (SOH) and temperatures from your Pylontech battery in real time, straight from the Console (RJ45) port. All data is exposed through a clean JSON API and a web dashboard reachable over WiFi from any phone, tablet or PC — no USB cable permanently tethered to a computer.
Truly plug & play: under 2 minutes from unboxing to a live dashboard, no app, no account, no cloud. Designed, assembled and tested in small batches by our partner pylon-monitor.com.
Recommended Uses
Ideal for remote monitoring and diagnostics of a Pylontech battery installed in a basement, garage or plant room — check state of charge, voltage, cells and temperatures over WiFi without running a USB cable to a PC. A local, subscription-free alternative to wireless battery diagnostic adapters, for solar installers and off-grid enthusiasts alike.
Availability Notification
Receive an email as soon as this product is available again.