Assembled in France
1 Meter Parallel Cables – AP SYSTEMS Battery 5.12kWh 51.2V – Amphenol Connectors
Main Features:
- Length: 1 meter
- Cross-section: 25 mm²
- Connectors: Amphenol SURLOK
- Supported current: 60A nominal (100Ah / 0.6C)
- High-conductivity tinned copper
- Insulation: rated up to 105°C
- Assembly: Manual in France 🇫🇷
- Crimping: Certified hydraulic
- Contact resistance: < 0.5mΩ
Genuine parts, hydraulic crimping
Certified compatibility
Guaranteed delivery
Credit Card, PayPal, Bank Transfer
Key Features
- Authentic Amphenol connectors
- 25mm² cable section for maximum conductivity
- Compatible with Pylontech, BYD, and Goodwe batteries
- Complies with European safety standards
1-meter parallel connection cable specially assembled to interconnect AP SYSTEMS APbattery 5.12kWh (51.2V / 100Ah) batteries in parallel configuration. The APbattery 5.12kWh supports up to 32 units in parallel to reach 163.84 kWh total capacity. Our France-assembled 🇫🇷 cables guarantee a reliable and secure connection between your modules.
Designed for the APstorage ecosystem:
The APsystems APbattery 5.12kWh uses high-performance LiFePO4 chemistry with 6000 life cycles and a 94% round-trip efficiency. These 25mm² cables are sized to support the battery's 60A nominal rating and current peaks, while maintaining minimal contact resistance.
Kit contents:
- 1 positive (red) 25mm² cable – 1 meter with Amphenol SURLOK connector
- 1 negative (black) 25mm² cable – 1 meter with Amphenol SURLOK connector
- Pre-fitted and tested connectors – ready to plug in
Certified French assembly:
- Hydraulic crimping performed with certified tooling 🇫🇷
- Contact resistance < 0.5mΩ
- High-conductivity tinned copper
- Insulation rated up to 105°C
Similar Products
Everything You Need to Know About 1 meter parallel cables – ap systems battery 5.12kwh 51.2v – amphenol connectors
Why Choose High-Quality Cables?
Parallel cables for Pylontech, BYD, and Goodwe batteries require optimal conductivity to ensure the efficiency of your energy storage system. Our products use high-purity copper and authentic Amphenol Surlock connectors to eliminate power losses.
French Assembly - A Quality Guarantee
All our cables are assembled in France by qualified technicians. Each connection is carefully crimped according to current standards, and each product undergoes rigorous quality control before shipment. Thus, you benefit from a reliable and durable solution for your installation.
Recommended Applications
These cables are perfectly suited for:
- Residential solar installations with energy storage
- Off-grid systems requiring reliable batteries
- Hybrid configurations combining grid and autonomy
- Existing storage capacity expansions
Guaranteed Compatibility
Our cables are compatible with all Pylontech lithium batteries (US2000, US3000, US5000), as well as equivalent BYD and Goodwe systems. Amphenol connectors ensure a perfect and secure connection.
Availability Notification
Receive an email as soon as this product is available again.